Honing brush banner
Honing brush

Honing brush:

  • Feature 1: Suitable for deburring and polishing different mechanical parts parts such as hydraulic holes, hydraulic valves, broken hammers, etc.
  • Feature 2: Clean up burrs, rust removal, internal cleaning of keyways and grooves, etc.
  • Feature 3: Material, size, density, weight, grit mesh and other parameters can all be customized according to demand
Material, size, grit mesh and other parameters can all be customized according to demand.

Material, size, grit mesh and other parameters can all be customized according to demand.

Overall Diameter Brush length Height Pole Diameter (optional) Pole Length(optional) Brush  Diameter Grit Filament
(optional)
ø35/ø45/ø55/ø65/ø75/ø85/ø95/ø105,ø125/ø150/ø160/ø200 30 58 ø8 50 ø0.12/ø0.15/ø0.2 #120/#180/#320 •Stainless steel 304
•Silicon carbide
•Boron Carbide
•Aluminum Oxide
30 58 ø8 50 ø0.12/ø0.15/ø0.2 #120/#240/#320
30 58 ø8 50 ø0.12/ø0.15/ø0.2 #120/#240/#320
30 58 ø8 50 ø0.12/ø0.15/ø0.2 #120/#240/#320
Filaments can all be customized as well.

Filaments can all be customized as well.

MATERIAL&INFO CENTER

  • Bristles: taken from the pig, from the root to the end,from coarse to fine, this feature makes the bristles elastic.Just like the end of the hair will be slightly, bifurcated; the common Bristle is brown (white) or black, and has excellent durability and water resistance.Naturally, Bristles can also prevent electricity, resist high temperature ,acid and alkali.
  • Horse tail:  longer than horsehair and has stronger hardnessr. It has the characteristics of long fiber length, strong pulling force, wear resistance and humidity resistance, and it is not easy to break.
  • Wool:  soft and elastic.Won’t leave brush mark after use. In addition to being made into a paint brush, wool is commonly used on short, soft brushes, such as makeup brushes.
  • Horse hair:  its softness is between bristle and wool, horsetail hair will be slightly harder than bristle; has good toughness and wear resistance, but it is not resistant to acid and alkali. Usually brush is used for polishing, cleaning and dust removal. And other related industries; the brush with horse hair is resistant to high temperatures of around 190 degrees Celsius.
  • White brown:  a wool made from the fiber of agave stems and leaves, mainly produced in Mexico; good acid and alkali resistance; good water absorption due to its own plant fiber; high temperature resistance, the product is commonly known as “Sisal Strip” .
  • Nylon 6: Decent cost,with excellent recovery, temperature and wear resistance, low melting point and wide process temperature range. Its stress resistance and solubility are better than nylon 66 plastic, but it is also more hygroscopic.
  • Nylon 66 (PA66):  Compared with nylon 6, nylon 66 has a slightly higher hardness, recovery and wear resistance at the same wire diameter, and its temperature resistance can reach 150 degrees Celsius.
  • Nylon 610 (PA610):  has low density, its water absorption is lower than nylon 66 (PA66) and nylon 6 (PA6). It has good dimensional stability and easy molding. The mechanical strength is close to PA66 and PA6. It is resistant to strong alkali and is more resistant to ordinary weak acids than double 6 and single 6, but soluble in formic acid.
  • Nylon 612 (PA612): a relatively high quality nylon yarn with low water absorption and better recovery and wear resistance than nylon 66. It has anti-mold and anti-bacterial properties, and its brush wheel and brush strip are often used in food, medical and electronics related industries. Application: Ultra-fine, able to maintain verticality in hot water with a certain temperature and very dry, not easy to bend, high stability
  • Nylon 1010 (PA1010):  Translucent, light and hard, bright-colored crystalline white or yellowish particles, relatively low density and water absorption than nylon 6 and nylon 66, cold resistance better than nylon 6, low cost and good economic effect Excellent self-lubricating and abrasion resistance, good oil resistance, low brittle conversion temperature (about -60 ° C)
  • Ceramic:  Ceramic fiber is a kind of fibrous lightweight refractory material with light weight, good thermal insulation performance, good thermal stability, good chemical stability, easy processing and convenient construction. However, It is neither wear-resistant nor resistant to collision, and can not resist the erosion of high-speed airflow,or the erosion of slag.
  • Silicon carbide:  Mixing quartz sand, petroleum coke (or coal char), wood chips (requires salt when producing green silicon carbide) and other raw materials smelted by electric furnace at high temperature. it has high thermal conductivity, small thermal expansion coefficient and good wear resistance.
  • Alumina:  mainly used for grinding (slight), polishing, deburring, textile sanding, etc., wherein the high temperature resistance is mainly used for products with higher technical requirements and higher temperature scenes.
  • Diamond: mainly used for grinding super-hard products,(surface roughness), the grinding force and chip force are stronger.examples are marble surface or tool passivation
  • Bronze: It is the earliest alloy in the history of metal smelting. The mix of tin or lead alloy to pure copper has special importance and historical significance. Compared with pure copper (copper), bronze has high strength and low melting point. Good castability, wear resistance and chemical stability.
  • Brass: An alloy composed of copper and zinc. Brass composed of copper and zinc is called ordinary brass. If it is a mixture of two or more elements, it is called special brass. Brass has strong wear resistance, the price is cheaper than copper and brass, and it is currently used in industrial products.
  • Copper: has good electrical conductivity and plasticity, but its strength and hardness are poor. Copper has excellent thermal conductivity, ductility and corrosion resistance. Trace impurities in copper have a serious impact on the conductivity and thermal conductivity of copper.
  • Carbon steel: also called carbon steel, refers to iron-carbon alloys with a carbon content Wc less than 2.11%. Carbon steel generally contains a small amount of silicon, manganese, sulfur, phosphorus in addition to carbon. The carbon content of carbon steel is generally higher. The higher the hardness, the higher the strength,the lower the plasticity.
  • Stainless steel:silver-white, iron alloy, melting point 1398~1454 °C, good corrosion resistance, heat resistance, low temperature strength and mechanical properties; good hot workability such as stamping and bending, no heat treatment hardening (Use temperature -196 ° C ~ 800 ° C), corrosion resistance in the atmosphere.
<ul>
<li><strong>Bronze:</strong> It is the earliest alloy in the history of metal smelting. The mix of tin or lead alloy to pure copper has special importance and historical significance. Compared with pure copper (copper), bronze has high strength and low melting point. Good castability, wear resistance and chemical stability.</li>
<li><strong>Brass:</strong> An alloy composed of copper and zinc. Brass composed of copper and zinc is called ordinary brass. If it is a mixture of two or more elements, it is called special brass. Brass has strong wear resistance, the price is cheaper than copper and brass, and it is currently used in industrial products.</li>
<li><strong>Copper:</strong> has good electrical conductivity and plasticity, but its strength and hardness are poor. Copper has excellent thermal conductivity, ductility and corrosion resistance. Trace impurities in copper have a serious impact on the conductivity and thermal conductivity of copper.</li>
<li><strong>Carbon steel:</strong> also called carbon steel, refers to iron-carbon alloys with a carbon content Wc less than 2.11%. Carbon steel generally contains a small amount of silicon, manganese, sulfur, phosphorus in addition to carbon. The carbon content of carbon steel is generally higher. The higher the hardness, the higher the strength,the lower the plasticity.</li>
<li><strong>Stainless steel:</strong>silver-white, iron alloy, melting point 1398~1454 °C, good corrosion resistance, heat resistance, low temperature strength and mechanical properties; good hot workability such as stamping and bending, no heat treatment hardening (Use temperature -196 ° C ~ 800 ° C), corrosion resistance in the atmosphere.</li>
</ul>

Contact Us